Troubleshooting Chart - Sharp CD-ES222H Operation Manual

Troubleshooting chart

CD-ES222H
ENGLISH
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
General
Symptom
The clock is not set to the
correct time.
When a button is pressed,
the unit does not respond.
No sound is heard.
CD player
Symptom
Playback does not start.
Playback stops in the mid-
dle or is not performed
properly.
Playback sounds are
skipped, or stopped in the
middle of a track.
E-25
Possible cause
Did a power failure occur? Reset
the clock. (Refer to page 10.)
Set the unit to the power stand-
by mode and then turn it back on.
If the unit still malfunctions, reset
it. (Refer to page 26.)
Is the volume level set to "0"?
Are the headphones connected?
Are the speaker wires discon-
nected?
Possible cause
Is the disc loaded upside down?
Does the disc satisfy the stan-
dards?
Is the disc distorted or
scratched?
Is the unit located near excessive
vibrations?
Is the disc very dirty?
Has condensation formed inside
the unit?
03/10/29
Tuner
Symptom Possible cause
The radio makes unusual Is the unit placed near the TV or
noises continuously. computer?
Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
Cassette deck
Symptom Possible cause
Cannot record. Is the erase-prevention tab re-
moved?
Cannot record tracks with Is it a normal tape? (You cannot
proper sound quality. record on a metal or CrO tape.)
Cannot erase completely.
Sound skipping. Is there slack in the tape?
Is the tape stretched?
Cannot hear treble. Are the capstans, pinch rollers,
or heads dirty?
Sound fluctuation.
Cannot remove the tape. If a power failure occurs during
playback, the heads remain en-
gaged with the tape. Do not open
the compartment with great
force.
CD-ES222H(H)E.fm
TINSZA002SJZZ