Sharp CD-ES222H Operation Manual page 26

Recording to a cassette tape (continued)
CD-ES222H
ENGLISH
To perform programmed recording:
1 Programme discs and tracks. (See page 14.)
2 Press the REC PAUSE (TAPE-2
3 Press the / button.
To interrupt recording:
Press the REC PAUSE (TAPE-2
Recording is paused, but CD playback will continue.
To resume recording, press the
To stop recording:
Press the button.
The CD and tape will stop.
Note:
Whilst recording, OPEN/CLOSE
mended to perform CD recording after closing the disc tray.
E-19
1
) button.
2
) button.
/ button.
3
4
button is deactivated. It is recom-
To interrupt recording:
Press the REC PAUSE (TAPE-2
To resume recording, press the
To stop recording:
Press the
Note:
If you hear a whistling noise whilst recording an AM station, move the
AM loop aerial.
03/10/29
Recording from the radio
Tune in to the desired station. (See page 15.)
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
Press the / button to start recording.
) button.
/ button.
button.
CD-ES222H(H)E.fm
TINSZA002SJZZ