Sharp CD-ES222H Operation Manual page 21

Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press
one of the 1 - 3 buttons on
the remote control to select
the desired disc.
2
Press the or but-
ton to select the desired track.
Selected track number
3
Press the MEMORY/SET (MEMORY) button to save the
track number.
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5
Press the / button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Selected disc number
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
Opening the disc tray automatically cancels the programmed se-
quence.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
Playback order
During programme operation, random play is not possible.
03/10/29
TINSZA002SJZZ
CD-ES222H(H)E.fm
CD-ES222H
ENGLISH
8
E-14