Listening To The Ipod - Sharp CD-SW440NH Operation Manual

Listening to the iPod

Supported iPod models:
● iPod nano (software 1.2 above)
● iPod mini (software 1.2 above)
● iPod (5 th
generation) (software 1.3 above) (Dock
connector equipped Click Wheel model)
th
● iPod (4
generation) (software 3.0.2 above) (Dock
connector equipped Click Wheel model)
● iPod nano (2 nd
generation) (software 1.0.0 above)
rd
● iPod nano (3
generation) (software 1.0.3 above)
● iPod nano (4 th
generation) (software 1.0.3 above)
● iPod classic (software 1.0.3 above)
● iPod touch (software 1.1 above)
● iPod touch (2 nd
generation) (software 2.1 above)
Caution:
Please update your iPod unit to the latest software version
from Apple's homepage before using it.
iPod adaptor connection
Choose the iPod adaptor that fits your iPod. Your iPod will
fit snuggly into the correct adaptor. If your iPod is not
mentioned below, an iPod adaptor may have been
included with your iPod unit.
The marking shows
which iPod fits
iPod iPod Description
Adaptor No.
9 5G iPod (with video)
9 U2 iPod with video
9 iPod classic
10 5G iPod with video
10 iPod classic
A iPod mini
A 4G iPod & U2 iPod
A iPod photo & colour U2
iPod
A iPod with colour display
B 4G iPod
B iPod photo
B iPod with colour display
Notes:
● iPod nano 2G, iPod nano 3G, iPod classic and iPod
touch are not compatible with the iPod adaptors listed
above. Please use the adaptor supplied with your iPod
unit.
● iPhone is not supported by this system.
● You can use an audio cable to connect your iPod to the
AUDIO IN socket if:
1.
your iPod adaptor does not fit into the iPod dock on
the main unit.
2.
you have an iPod that does not have an iPod
adaptor.
3.
you have an iPod that does not have an iPod 30 pin
connector.
9
Capacity
30GB
30GB
80GB, 120GB
60GB & 80GB
160GB
4GB & 6GB
20GB
20GB & 30GB
20GB
40GB
40GB & 60GB
60GB
E-8
To insert iPod adaptor
1
Press the ON/STAND-BY button to turn the power on.
2
Insert the iPod adaptor into the iPod dock and connect
your iPod.
iPod (bottom)
Dock connector
iPod adaptor
iPod dock
iPod connector
iPod playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the iPod button on the remote control or
FUNCTION button repeatedly on the main unit to
select iPod function.
3
Insert iPod unit in iPod dock of main unit.
4
Press the / button to start playback.
Notes:
● Once the iPod is connected to the unit it will begin
charging.
● The iPod unit cannot be charged whilst the main unit is
in the stand-by mode or during USB mode.
● Please make sure to set iPod unit to either NTSC or
PAL to match your TV signal. Please visit Apple's
homepage for further information.
ON/STAND-BY ON/STAND-BY
CD
USB
iPod
M I NI CO M P O NE NT S Y S T E M
CD-SW440
FUNCTION FUNCTION
ON/STAND-BY ON/STAND-BY
VOL VOL
TAPE