Sharp CD-SW440NH Operation Manual page 18

Listening to the iPod (continued)
To remove iPod adaptor
Insert the tip of a screwdriver ("–" type, small) into the
iPod adaptor hole as shown and lift upward to remove.
To disconnect iPod
Simply remove the iPod from the iPod dock. It is safe to do
so even during playback.
Navigating the iPod menus
1
Press the MENU button to view the menu on iPod unit.
Press it again to go back to previous menu.
2
Use the TUNING (
control to select an item on the menu and then press
ENTER button.
Note:
When navigating the iPod menus with remote control, do
not operate any of the buttons on the iPod unit. The volume
level is adjusted by pressing the VOL (+ or –) button on the
main unit or the remote control. Adjusting the volume on
the iPod unit gives no effect.
iPod operation:
The operations described below depend on the generation
iPod you are using.
System on operation:
When the main unit is powered on, the iPod unit will
automatically power on when docked in the unit (including
TIMER function/exclude USB function).
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked
iPod unit will automatically turn to stand-by mode.
Watching videos on a TV connected to
iPod
1
Press the DISPLAY (TV OUT) button for more than 2
seconds.
"TV DISP" will appear on display.
2
Press the ENTER button to start playback.
Notes:
● If the TV Out setting is already turned on at video menu,
the video is automatically displayed on the TV screen
when ENTER key is pressed.
● To return to watching video on iPod screen, press the
MENU button to enter video menu. Then press the
DISPLAY (TV OUT) button for more than 2 seconds
until "iPodDISP" appears.
● During iPod video playback, pressing the DISPLAY (TV
OUT) button will not toggle video out display between
iPod and TV.
or ) button on the remote
iPod playback detection function:
Once the play button on the iPod unit is pressed, the main
unit will automatically change to iPod function overriding
the previous function selected.
Caution:
● Unplug all accessories for the iPod before inserting it
into the iPod dock.
● Stop button ( ) at main unit is invalid during iPod
function.
Various iPod functions
Function Main
unit
Play
Pause
____
Track up/
down
____
Fast
forward/
reverse
____
Display
____
Repeat
____
Shuffle
____
iPod
Menu
____
iPod
Enter
____
iPod
Cursor
Up/Down
E-9
Remote Operation
control
Press in the pause
mode.
Press in the playback
mode.
Press in the playback or
pause mode.
If you press the button in
the pause mode, press
the / button to start
the desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
iPod back light ON.
Press for more than 2
seconds to toggle the
video out display
between iPod or TV.
Press to toggle repeat
mode.
Press and hold down to
toggle shuffle mode.
Press to view the iPod
menu during iPod
function.
Press to confirm the
selection.
Press to select the iPod
menu.