Setting The Clock (Remote Control Only); Listening To The Ipod - Sharp XL-DH10NH Operation Manual

Setting the clock (Remote control
only)
CD
USB
MUTE MUTE
TUNING/
FOLDER
AUX AUX
In this example, the clock is set for the 24-hour (00:00)
display.
1
Press the ON/STAND-BY button to turn to stand-by
mode.
2
Press and hold the CLOCK/TIMER button until "00:00"
appear.
3
Within 10 seconds, press the
adjust the hour and then press the CLOCK/TIMER
button. Press the
the time by 1 hour. Hold it down to advance
continuously.
4
Press the or button to adjust the minutes and
then press the CLOCK/TIMER button. Press the
button once to advance the time by 1 minute. Hold
it down to advance continuously.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
[When the power is on]
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
The "00:00" will appear when the AC power supply is
restored after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1.
CLOCK/TIMER CLOCK/TIMER
PTY PTY
RDS RDS
or button to
or button once to advance

Listening to the iPod

Supported iPod models:
●
iPod nano (software 1.2 above)
●
iPod mini (software 1.2 above)
th
●
iPod (5 generation) (software 1.3 above) (Dock
connector equipped Click Wheel model)
th
●
iPod (4 generation) (software 3.0.2 above) (Dock
connector equipped Click Wheel model)
nd
●
iPod nano (2
rd
●
iPod nano (3
th
●
iPod nano (4
●
iPod classic (software 1.0.3 above)
●
iPod touch (software 1.1 above)
nd
●
iPod touch (2
Caution:
Please update your iPod unit to the latest software version
from Apple's homepage before using it.
Notes:
●
Once the iPod is connected to the unit it will begin
charging.
●
The iPod unit cannot be charged whilst the main unit is
in USB mode.
■ iPod adaptor connection
The marking shows
which iPod fits
iPod
Adaptor iPod Description
No.
A 5G iPod (with video)
or
A U2 iPod with video
A iPod classic
A 4G iPod & U2 iPod
A 4G iPod
A iPod photo
A iPod with colour display
A iPod Touch
A iPod Touch (2nd Gen.)
B iPod nano
B iPod nano (2nd Gen.)
B iPod nano (3rd Gen.)
B iPod nano (4th Gen.)
C iPod mini
D iPod photo & colour U2 iPod
D iPod with colour display
E 5G iPod with video
E iPod classic
Notes:
●
If you have an iPod that does not have an iPod 30 Pin
connector, you can use an audio cable to connect it to
the AUX IN socket.
●
iPhone is not supported by this system.
E-6
generation) (software 1.0.0 above)
generation) (software 1.0.3 above)
generation) (software 1.0.3 above)
generation) (software 2.1 above)
A
80GB & 120GB
40GB & 60GB
8GB & 16GB
8GB, 16GB &
2GB & 4GB
2GB, 4GB & 8GB
4GB & 8GB
8GB & 16GB
4GB & 6GB
20GB & 30GB
20GB, 60GB
60GB & 80GB
Capacity
30GB
30GB
20GB
40GB
60GB
32GB
160GB