Writing And Editing Text - Siemens Gigaset C595 User Manual

General specifications
DECT standard
GAP standard
No. of channels
Radio frequency range 1880–1900 MHz
Duplex method
Channel grid
Bit rate
Modulation
Language code
Transmission power
Range
Base power supply
Environmental condi-
tions in operation
Dialling mode
Pin connections on the telephone
jack
3
2
1
is supported
is supported
60 duplex channels
Time multiplex,
10 ms frame length
1728 kHz
1152 kbit/s
GFSK
32 kbit/s
10 mW, average power
per channel
up to 300 m outdoors,
up to 50 m indoors
230 V ~/50 Hz
+5°C to +45°C, 20% to
75% relative humidity
DTMF (tone dialling)/
DP (dial pulsing)
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused

Writing and editing text

The following rules apply when writing text:
Each key between Q and O is
u
assigned several letters and characters.
Control the cursor with u v t s
u
Press and hold u or v to move the
cursor word by word.
u
Characters are inserted at the cursor posi-
tion.
Press the star key * to display the
u
table of special characters. Select the
required character and press the display
§Insert§
key to insert the character at the
cursor position.
Press and hold Q to O to insert dig-
u
its.
Ñ
u
Press display key to delete the
characters to the right of the cursor. Press
and hold to delete the word to the right
of the cursor.
u
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
Appendix
81