Siemens Gigaset C595 User Manual page 14

Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤
To attach – press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤
To remove – using your right
thumb apply pressure to the cen-
tre of the belt clip, push the fin-
gernail of your left index finger
between the clip and the casing
and lift the clip upwards.
Placing the handset in the base/charging cradle
¤
Place the handset in the base/charging cradle with its display facing forward.
Each handset is registered with the base at the factory. You do not need to com-
plete a registration. If you wish to use your handset with a different base or use fur-
ther handsets with your base, you will have to register the handset manually
¢
page 56.
To charge the batteries, leave the handset in the base/charging cradle.
Please note
Only place the handset in the base/charging cradle that is intended for it.
First steps
13