Speedometer Unit - Yamaha Royal Star Venture XVZ13TFX Owner's Manual

Table of Contents

Advertisement

Speedometer unit

1. Speedometer
2. Odometer/tripmeter/fuel reserve tripme-
ter/clock
3. "RESET" button
4. "SELECT" button
5. Fuel meter
The speedometer unit is equipped with
the following:
G
a
digital
speedometer
shows riding speed)
G
an odometer (which shows the to-
tal distance traveled)
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled on the
fuel reserve)
INSTRUMENT AND CONTROL FUNCTIONS
G
EAU36400
a clock
G
a fuel meter
Odometer and tripmeter modes
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP 1" and "TRIP 2" in the following
order:
ODO → TRIP 1 → TRIP 2 → ODO
If the fuel level warning light comes on
(see page 3-2), the odometer display
will automatically change to the fuel re-
serve tripmeter mode "TRIP F" and
start counting the distance traveled
from that point. In that case, pushing
the "SELECT" button switches the dis-
play between the various tripmeter and
odometer modes in the following order:
TRIP F → TRIP 1 → TRIP 2 → ODO →
(which
TRIP F
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button. If you do not
reset the fuel reserve tripmeter manual-
ly, it will reset itself automatically and
the display will return to "TRIP 1" after
refueling and traveling 5 km (3 mi).
NOTE:
After resetting the fuel reserve tripme-
ter, the display will return to the prior
mode.
Clock mode
To change the display to the clock
mode, push the "SELECT" button for at
least two seconds.
To change the display back to the
odometer and tripmeter modes, push
the "SELECT" button.
To set the clock:
1. Push both the "SELECT" and "RE-
2. When the hour digits start flashing,
3. Push the "SELECT" button, and
4. Push the "RESET" button to set
5. Push the "SELECT" button to start
3-4
SET" buttons for at least two sec-
onds.
push the "RESET" button to set the
hours.
the minute digits will start flashing.
the minutes.
the clock.
3

Advertisement

Table of Contents
loading

Table of Contents