Troubleshooting; Technical Specifications; Technical Support - Harman Kardon Car Stereo System Owner's Manual

TROUBLESHOOTING

Problem:
Message = iPod Disconnected
Solution:
• Check that the iPod Connection Cable is connected
between the Electronics Enclosure and the iPod.
Problem:
Message = AUX is Disabled
Solution:
• Check AUX Input (see page 10).
• Check the connection between the Electronics Enclosure
and the auxiliary device.
Problem:
Hearing static when playing the iPod with wireless
FM transmission.
Solution:
• Interference from an FM station at the same frequency.
Try another FM frequency (see page 9).
• Consider installing the optional Wired FM Adaptor
(see page 5).
Problem:
Drive + Play won't turn on.
Solution:
• Replace the in-line fuse with one of the same type
and rating.
Problem:
Message = Please update your iPod software
Solution:
• Download and install the latest software version for your
iPod (see Apple.com).

Technical Support

If you are having other problems with Drive + Play, please
contact us at:
1 – (516) – 255 – HKHK (4545)
Or on the Web at:
www.harmankardon.com
12 TROUBLESHOOTING

TECHNICAL SPECIFICATIONS

Dimensions of Electronics Enclosure:
6" (152.0mm) x 1-1⁄4" (32.4mm) x 2-5⁄8" (66.4mm) (W x H x D)
Maximum Mounting Diameter of Text Display:
1-13⁄16" (46.2mm)
Maximum Mounting Diameter of Control Knob:
1-13⁄16" (45.9mm)
Fuse Rating: 2A
Nominal Current Requirement with iPod Connected: 500mA
Line Output Voltage: 1V
Maximum Auxiliary Input Voltage: 1V
Audio Input and Output Jacks: 3.5mm stereo mini-plug
All features and specifications are subject to change without notice.
Harman Kardon and Harman International are registered trademarks, and Drive + Play is a
trademark, of Harman International Industries, Incorporated.
Apple and iPod are registered trademarks of Apple Computer, Inc.
Information for the User
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B Digital Device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
250 Crossways Park Drive, Woodbury, New York 11797
www.harmankardon.com
© 2005 Harman International Industries, Incorporated. All rights reserved.
Part No. 950-0081-001 revB