Other Useful Features; Setting When Using External Devices; Input Source Settings; Connecting A Usb Device (Media Player Function) - Sharp LC-32FH500E Operation Manual

Other useful features

Setting when using external
devices

Input source settings

For selecting the input type of external equipment
SCART 1: CVBS, RGB
SCART 2: Y/C, CVBS
• If no (colour) image is displayed, try changing to
another signal type.
• Check the operations manual of the external equipment
for the signal type.
Connecting a USB device
(Media Player)
Connect an USB device to the TV as shown below.
• Depending on the USB device, the TV may not be
able to recognise the contained data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending
on character set) may not be displayed.
• Do not disconnect a USB device or memory card from
the TV while transferring files, using the slide show
function, when a screen is switching to another or
before you exit "MEDIA PLAYER" from the "INPUT
SOURCE" menu.
• Compatibility with USB hard disc connection.
• Do not connect and disconnect a USB device from
the TV repeatedly.

MEDIA PLAYER function

After selecting Media Player, the TV loads USB device
files, and shows the following screen:
1 Pressing ◄/► buttons you can change between
different modes: PHOTO, MUSIC, MOVIE or TEXT.
Press OK to select the option you want to reproduce.
2 Press ▲/▼/◄/► to select the folder where
you want to search the files and then press OK.

PHOTO mode

You can reproduce photos with JPG, JPEG and BMP
format on your TV.
Several kinds of reproduction are possible.
1 Select PHOTO mode and press OK.
2 Select the file you want to display on full screen with
▲/▼ /◄/► buttons and press OK to start the viewing.
21