Attaching The Stand - Sharp Aquos LC-32D53X Operation Manual

Preparation

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confi rm the 8 screws supplied with the TV.
1
Short screws ( g 4)
(used in step 2)
1 Set the post for the stand unit onto the
2
box.
2 Attach the base to the post.
3 Insert and tighten the 4 screws into the 4
holes on the bottom of the base.
Hex key
Screw
6
Long screws ( g 4)
(used in step 3)
1 Insert the stand into the openings on the
3
bottom of the TV.
2 Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
NOTE
• To detach the stand, perform the steps in reverse order.
Hex key
Screw
Soft cushion