Picture Aspect Ratio; Standby Mode - Sharp Aquos LC-32D53X Operation Manual

Useful adjustment settings

Picture aspect ratio

The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "4:3 Mode", and then
3
press ENTER.
Press a / b to select "Panorama" or "Normal",
4
and then press ENTER.
WSS signal 4:3 screen
4:3 mode "Panorama"
Selected item
Panorama Wide image without side bars
Normal Normal range keeping 4:3 or 16:9 aspect
ratio
4:3 mode "Normal"
Description

Standby Mode

Standby Mode may be set to either start the TV quickly
from standby or conserve energy while on standby.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Standby Mode", and
3
then press ENTER.
Press a / b to select "Mode 1" or "Mode 2",
4
and then press ENTER.
Selected item
Mode 1 Starting the TV is quick from standby.
Mode 2 Power consumption is small during
standby.
Press MENU to exit.
5
Description
41