Basic adjustment settings (Analogue/Digital)
3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select "3D-Y/C", and then press
4
ENTER.
Colour Temp.
Fine Motion Advanced
Film Mode
Black
3D – Y/C
Monochrome
Press a / b to select the desired level, and
5
then press ENTER.
Selected item
Standard
Normal adjustment
Fast
For movie image
Slow
For still image
3D-Y/C off
Off
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Monochrome
For viewing a video in monochrome.
Repeat steps 1 to 3 in 3D-Y/C.
1
Press a / b to select "Monochrome", and then
2
press ENTER.
Press a / b to select "On", and then press
3
ENTER.
26
Standard
Fast
Slow
Off
Description
Audio adjustment
You can adjust the sound quality to your preference
with the following settings.
Press MENU and the MENU screen displays.
1
Press c / d to select "Audio".
2
Audio
STANDARD
Treble
[
0]
Bass
[
0]
Balance
[
0] L
Surround
Reset
Press a / b to select the desired menu item.
3
Press ENTER to proceed if necessary.
Press a / b or c / d to select the desired item
4
or adjust the item to the desired level. Press
ENTER if necessary.
c button
Selected item
Treble
For weaker treble
Bass
For weaker bass
Balance
Decrease audio from
the right speaker
NOTE
• For resetting all adjustment items to factory preset values,
press a / b to select "Reset", press ENTER, press a / b
to select "Yes", and then press ENTER.
Power Control
+
+
R
d button
For stronger treble
For stronger bass
Decrease audio
from the left
speaker