Output Select; Teletext Language Setting - Sharp Aquos LC-32A53X Operation Manual

Useful features

Output Select

For output the signal to external equipment.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Input Select", and then
3
press ENTER.
Press a / b to select "Input 1", and then press
4
ENTER.
Press a / b to select "Output".
5
NOTE
• Only Input 1 can be select to become output.
• HDMI is digital signal, cannot select to output.
• When Input 1 select to become output, please connect
composite signal to Input 2.
42

Teletext language setting

If Teletext information does not display correctly,
perform the setting procedure below.
Select from among 4 kinds of language tables: West
Europe, East Europe, Greek/Turkish, Cyrillic.
Each table is compatible with the Teletext languages
listed below.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Text Language", and
3
then press ENTER.
Press a / b to select receivable teletext
4
broadcasting language in your country, and
then press ENTER.
[ Setup ... Text Language ]
MENU
West Europe
East Europe
Greek/Turkish
Cyrillic
• West Europe - English, French, Scandinavian,
Czech, German, Spanish, Italian
• East Europe - Polish, French, Scandinavian,
Czech, German, Slovenian/Croatian, Italian,
Rumanian
• Greek/Turkish - English, French, Scandinavian,
Turkish, German, Spanish, Italian, Greek
• Cyrillic - English, Russian, Estonian, Czech,
German, Spanish, Ukrainian, Lettish
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.