Simple Button Operation For Changing Volume/Sound; Sleep Timer - Sharp Aquos LC-32A53X Operation Manual

Watching TV
Simple button operation for
changing volume/sound
Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOL k .
• To decrease the volume, press VOL l .
NOTE
• "TV", "INPUT1", "INPUT2", "INPUT3", "INPUT4" and
"INPUT5" (PC) modes can store volume adjustment values
separately.
Using Mute ( e ) on the remote control unit
e mutes the current sound output.
Press e .
1
• The sound is silenced.
• " M " is displayed while the mute function is on.
Press e again within 30 minutes to cancel the
2
mute.
• Before 30 minutes, the volume level returns to the
previous setting.
NOTE
• Within 30 minutes after pressing e , press one of the
buttons below to cancel the mute.
— VOL l /VOL k
— e
• Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing VOL k .
20
Mute

Sleep timer

Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
1
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remain 2 hr. 00 min.
Each time you press SLEEP, the remaining
2
time switches as shown below.
0 hr. 30 min.
Off 2 hr. 30 min.
NOTE
• The sleep timer indicator on the TV lights up when the time
has been set.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select "Off" by pressing SLEEP to cancel the sleep timer.
1 hr. 00 min. 1 hr. 30 min.
2 hr. 00 min.
15