Dnr (Digital Noise Reduction); Input Select; Dnr; Input1 - Sharp Aquos LC-32A53X Operation Manual

Useful adjustment settings

DNR (Digital Noise Reduction)

Produces a clearer video image.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "DNR", and then press
3
ENTER.
Press a / b to select the desired level, and
4
then press ENTER.
Off
High
Low
36

Input Select

Selecting input source
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
Press TV/VIDEO on the remote control unit or
1
TV/VIDEO on the TV.
Press TV/VIDEO on the remote control unit
2
or TV/VIDEO on the TV to select the input
source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a / b .
Selecting input signal type
For setting the signal type of external equipment.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Input Select", and then
3
press ENTER.
Press a / b to select an input source among
4
"Input 1" and "Input 2", and then press ENTER.
Press a / b to select the desired level, and
5
then press ENTER.
Input source
Input 1
Input 2
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to "Auto", the input terminal
where cable is connected is automatically selected.
• When the signal type is set to "Auto" and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
Input 1: COMPONENT s S-VIDEO s VIDEO
Input 2: COMPONENT s VIDEO
• When Input 1 is set to "Output", Input 1 will become video
out function.
Selectable item
Input (Auto), Input (COMPONENT),
Input (S-VIDEO), Input (VIDEO),
Output
Auto, COMPONENT, VIDEO