Sharp AQUOS LC-15L1E Operation Manual page 32

Useful Features (Continued)
T T T
SUBPAGE SUBPAGE
MENU OK
SOUND SOUND MENU MENU
M M
CH CH
TV/VIDEO TV/VIDEO
30
Transmission Setting (Continued)
[2] Setting Channel
Four settings can be selected for the communication channel consisting of
Auto, A, B and C. When set to "Auto", available channels that can be transmit-
ted are set automatically. It is recommended to normally set the communication
</>
channel to "Auto".
END
E E
1
Press ]/[ to select "Channel", and then
press OK.
]/[
OK
2
Press </> to select "Auto", and then press
OK.
• The available settings change in the
• "Adjusting channel setting." is
[3] Setting Distance
Select the Distance that yields the best reception.
Setting
Picture
quality
Transmission
capacity
1
Press ]/[ to select "Distance", and then
press OK.
2
Press </> to select the desired distance,
and then press OK.
• "Adjusting distance setting." is
3
Press END to exit.
• If reception has become poor after changing
Auto A B
order shown below each time </>
is pressed.
Auto A B
displayed on the screen and the
communication channel is set
automatically.
far
mid
LOW
HIGH
displayed on the screen and the
communication distance is set
automatically.
Note:
the locations of the Wireless Centre and TV
receiver, the problem may be corrected by
resetting the communication channel and
communication distance.
C
Displayed
A d j u s t i n g c h a n n e l s e t t i n g .
C
in yellow
near
HIGH
LOW
Displayed
A d j u s t i n g d i s t a n c e s e t t i n g .
in yellow