Auto Search; Manual Adjust; Fine; Colour Sys - Sharp Aquos LC-19A1E Operation Manual

Menu operations

Auto Search

You can automatically search for and download TV
channels by performing the procedure below. This is
the same function as from programme auto search to
auto sorting in Auto Installation.
1
Repeat steps 1 to 4 in Programme Setup.
2
Press a/b to select "Yes", and then press OK.

Manual Adjust

You can set some channel items manually.
[ Setup ... Programme Setup ]
MENU

Fine

Colour Sys.

Sound Sys. 179.25

Label

Skip

Decoder

Lock

1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Programme Setup", and
then press OK.
If you have already set the PIN under "Child Lock",
enter it here.
• See page 16 for setting PIN.
4
Press a/b to select "Manual Adjust" and then
press OK.
5
Press a/b to select "Yes", and then press OK.
6
Press a/b/c/d to select the channel you want
to edit, and then press OK.
• The selected channel information displays.
7
Press a/b to select the desired menu item, and
then press OK.
8
Press a/b (/0–9/c/d) to select or adjust.
Fine
You can adjust the frequency to your desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency in step
8 above, you can set by directly entering the frequency
number of the channel with 0–9.
EXAMPLE
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 0 s 4 s 9 s 2 s 5.
MHz
Colour sys.
Select the optimum colour systems to receive. (AUTO,
PAL, SECAM)
NOTE
• Factory preset value is "AUTO".
• If "AUTO" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, SECAM).

Sound sys. (Broadcasting system)

Select the optimum sound systems (Broadcasting
systems) to receive. (B/G, D/K, I, L, L')
Label
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.
1
Repeat steps 1 to 7 in Manual Adjust.
2
Press a/b to select characters and c/d to move
to the desired digit.
3
Repeat step 2 above until the name is fully spelt
out, and then press OK to complete the label
setting.
Skip
Channels with "Skip" set to "On" are passed over when
using Pr/Ps even if selected while watching the
image from the TV.
Decoder
When connecting a decoder to the unit, you need to
select EXT1.
NOTE
• "Off" is factory preset value.
Lock
You can block the viewing of any channel.
NOTE
• See page 16 for setting PIN.
• When Lock is set to "On" for a channel, "Child lock has
been activated." displays, and the image and sound of
the channel are blocked.
• When pressing OK while "Child lock has been activated."
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
15