Installation Of Batteries; Using The Remote Control Unit; Display The Menu Screen; Select An Item By The Remote Control - Sharp LC-19S7E Operation Manual

preparation

installation of batteries

1�
Insert two AAA batteries into Remote control.
Make sure (k) and (l) are facing the proper
direction.
2�
Replace the cover.
note
• If the remote control will not to be used for a long
time, remove the batteries to avoid remote control
damage.
Caution
Improper use of batteries can result in chemical
leakage or explosion. Be sure to follow the instructions
below.
• Do not mix batteries of different types. Different
types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and
new batteries can shorten the life of new batteries or
cause chemical leakage in old batteries.
• Remove batteries as soon as they have worn out.
Chemicals that leak from batteries can cause a rash.
If you find any chemical leakage, wipe thoroughly
with a cloth.
• The batteries supplied with this product may have a
shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for
an extended period of time, remove the batteries
from it.
note on disposing batteries:
The batteries provided contain no harmful materials
such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate
that batteries may no longer be thrown out with the
household rubbish. Deposit any used batteries free of
charge into the designated collection containers set up
at commercial businesses.
6

using the remote control unit

Use the remote control unit by pointing it towards the
remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
5 m
Remote control sensor
30° 30°
EPG PRE PR
YPbPr
P
MENU /EXIT
ECO PR LIST FREEZE

Display the menu Screen

Press menu/eXit and the menu screen displays.

Select an item by the remote control

1�
Press oœpπ to select the desired menu.
2�
Press pπto select / adjust the item to the
desired level. The setting on screen is applied
immdiately.
3�
Press p to return to the previous layer.
Menu
Picture
Sound
Features
Installation
Move

exit the menu screen

The operation will exit the menu screen if you press
menu/eXit before it is completed.
Smart Picture Standard
Backlight 50
Contrast 50
Brightness 50
Colour 50
Hue -3
5
Sharpness
Select