Menu Operation; Picture Menu; Audio Menu; Eco Menu - Sharp AQUOS LC-32M450M Operation Manual

Menu operation

1
Press MENU and the MENU screen displays.
2
Press c/d to select the desired menu. (Picture,
Audio, ECO, Setup, Option)
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.

Picture menu

Picture Audio ECO
AV mode [STANDARD]
OPC [ Off ]
Backlight [ + 8 ] –16 +16
Contrast [ + 3 0 ] 0 +40
Brightness [ 0 ] –30 +30
Colour [ 0 ] –30 +30
Tint [ 0 ] –30 +30
[ 0 ]
Sharpness –10 +10
Advanced
Reset
H OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the
screen to suitable backlight brightness according to
the lighting conditions.
Selected item Description
Displays the OPC effect on the screen
On:Display
while adjusting the brightness of the
screen.
Automatically adjusts.
On
Off The brightness is fi xed at the value set in
"Backlight".
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
H Picture adjustments
c button d button
Selected item
The screen dims The screen
Backlight
brightens
Contrast For less contrast For more contrast
For less brightness For more
Brightness
brightness
Colour For less colour For more colour
intensity intensity
Skin tones become Skin tones become
Tint
reddish greenish
Sharpness For less sharpness For more
sharpness
H Advanced
Colour temp. (Colour temperature)
Adjusts the colour temperature to give the best white
image.
Selected item Description
High White with bluish tone
Mid-High
Middle
Mid-Low
Low
White with reddish tone
Film mode
Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
fi lm frame for high-defi nition picture quality. (On, Off)
Active contrast
Automatically adjusts the contrast of an image according
to the scene. (On, Off)
3D-Y/C
Provides high quality images with minimal dot crawl and
cross colour noise. (On, Off)
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Monochrome
For viewing images in monochrome. (On, Off)
DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer video
image. (Off, High, Low, Auto)
NOTE
• For resetting all Picture adjustment items to factory preset
values, press a/b to select "Reset", press ENTER, press
c/d to select "Yes", and then press ENTER.

Audio menu

Audio ECO
STANDARD
Treble [ 0 ] –15
[ 0 ] –15
Bass
[ 0 ]
Balance L
SRS TS HD
Bass enhancer
Reset
H Audio adjustments
c button
Selected item
Treble For weaker treble
Bass For weaker bass
Decrease audio
Balance
from the right
speaker
H SRS TruSurround (TS) HD
You can enjoy SRS TruSurround HD
same as you were in movie theatre.
Using SRS TS HD on the menu screen
You can produce SRS TruSurround HD
the "Audio" setting.
Selected item Description
SRS TruSurround HD
On
quality surround sound experience,
when watching DVD movies and TV
programmes broadcast in surround
sound.
Off Outputs the normal sound.
H Bass enhancer
powered by SRS Labs, Inc.
This function allows you to enjoy bass-enhanced
sound.
Selected item Description
On Bass enhancer function is on.
Off Outputs the normal sound.
NOTE
• For resetting all Audio adjustment items to the factory
preset values, press a/b to select "Reset", press
ENTER, press c/d to select "Yes", and then press
ENTER.
9 10

ECO menu

Setup ECO
No signal off
4
+15 Power management
+15 No operation off
R Ecology
[ Off ]
[ On]
H No signal off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
d button
time displays every minute.
For stronger treble
NOTE
For stronger bass
• When a TV programme fi nishes, and the TV receives signal
Decrease audio
input, this function may not operate.
from the left
speaker H Power management (PC input mode only)
You can set the TV to automatically power off when
TM
no image is displayed on PC.
TM
sound, the
Selected item
Off • No power management
• Factory preset value.
TM
effects from
• If no signal inputs for approximately 8
Mode1
minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
TM
creates a high
• You can turns on manually by pressing
POWER.
Mode2 • If no signal inputs for approximately 8
seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on
automatically.
• You can turns on manually by pressing
POWER.
H No operation off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30min., 3hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
H Ecology
When set to "Yes", the TV activates the following
power saving mode.
• "OPC" set to "On" (Page 9)
• "No signal off" set to "Enable" (Page 10)
• "Power management" set to "Mode1" (Page 10)
• "No operation off" set to "3hr." (Page 10)
• "Quick start" set to "Off" (Page 12).
NOTE
• Ecology mode cannot be deactivated by selecting "No".
Each setting must be changed individually to deactivate
Ecology mode.
Setup Option
[Disable]
[Disable]
Description