System Connections - Sharp XL-MP130H Operation Manual

System connections (continued)
XL-MP130H
ENGLISH
AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
ANTENNA AM
LOOP
FM
75 OHMS
VIDEO/AUX
IN
RIGHT LEFT
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
RIGHT LEFT SUBWOOFER
PRE-OUT
Notes:
The unit will start the tape initialisation when plugged into the wall
socket. During this process, an initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
Cooling fan:
The main unit is built with a cooling fan at the rear of the unit for im-
proved cooling. Please do not cover the opening of the fan with any
obstacles, as this will block proper ventilation.
RATED SPEAKER IMPEDANCE:
AC INPUT
E-9
Wall socket
(AC 230 V, 50 Hz)
VIDEO/AUX
IN
RIGHT LEFT
6 OHMS MIN.
SUBWOOFER
RIGHT LEFT
PRE-OUT
Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS/DEMO button.
The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to se-
lect the extra bass mode.
External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
External FM aerial