Sharp XL-MP130H Operation Manual page 19

Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the AM
loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
ANTENNA
AM
LOOP
FM
75 OHMS
VIDEO/AUX
IN
RIGHT LEFT
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
SUBWOOFER
RIGHT LEFT PRE-OUT
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling > < Attaching to the wall >
Wall
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
RIGHT
Caution:
Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may
be injured.
Speaker grilles are removable
Make sure nothing comes into contact
with the speaker diaphragm when you
remove the speaker grilles.
Screws (not supplied)
ANTENNA
AM
LOOP
FM
75 OHMS
VIDEO/AUX
IN
RIGHT LEFT
SUBWOOFER
LEFT PRE-OUT
Red Black
XL-MP130H
ENGLISH
Incorrect
E-8
8