Maintenance; Specifications - Sharp XL-HP500H Operation Manual

Maintenance

XL-HP500H
ENGLISH
" Cleaning the tape-handling parts
! Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
! When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
Pinch roller
Capstan
! After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
" Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
! Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
! Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
E-31

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
" General
Power source
Power
A A
B D B
C
consumption
Dimensions
Weight
Erase head
( * )This power consumption value is obtained when the demonstra-
Recording/Playback head
" Amplifier
Output power
Output terminals
Input terminals
AC 230 V, 50 Hz
Power on: 95 W
Power stand-by: 0.6 W (*)
Width: 205 mm (8-1/8")
Height: 260 mm (10-1/4")
Depth: 366 mm (14-7/16")
6.2 kg (13.7 lbs.)
tion mode is cancelled in the power stand-by mode. Refer to
page 8 to cancel the demonstration mode.
PMPO: 364 W
MPO: 182 W (91 W + 91 W) (DIN 45 324)
RMS: 100 W (50 W + 50 W) (DIN 45 324)
RMS: 84 W (42 W + 42 W) (DIN 45 500)
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Subwoofer (Audio signal): 200 mV/10 ko-
hms at 70 Hz
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
02/7/23 XL-HP500H(H)E3.fm