Listening To A Cd (Cds); Disc Trays; Cd Eject Buttons; 16. Cd Or Tape Stop Button - Sharp XL-HP500H Operation Manual

Listening to a CD (CDs)

XL-HP500H
ENGLISH
This system can also play audio CD-R and CD-RW discs, but can-
not record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of disc or the device that was used for recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the button to open the disc tray 1.
4
Place the CD on the disc tray 1, label side up.
Be sure to place 8 cm (3") CD in the middle of the disc trays.
E-11
5
Press the
6
You can place discs on the trays 2 - 3 by following steps
3 - 5.
7
Press the
! Playback will begin from track 1 on the DISC 1. After that
! When the last track on the third disc has finished playing,
! When there is no CD in one of the disc tray 1 - 3 positions,
To interrupt playback:
Press the CD
To resume playback from the same point, press the
To stop playback:
Press the
To exchange other CDs whilst playing a disc:
Press the
To remove the CDs:
12 cm (5") 8 cm (3")
Whilst in the stop mode, press the desired
02/7/23
button to close the disc tray 1.
Total number of tracks on Total playing time of the
the CD whose number is CD whose number is
flashing flashing
/ button to start playback.
disc finishes playing, the next disc will automatically play.
the CD player will stop automatically.
that position will be skipped and the next CD will be played.
button on the remote control.
(CD ) button.
button for the stopped disc and exchange discs.
button.
XL-HP500H(H)E2.fm
button.