Automatic Operation - Sharp R-32FBST Operation Manual

R-32FBST English 01/07/2004
The AUTOMATIC function automatically works out
the correct cooking mode and cooking time. You can
choose from 7 AUTOCOOK menus and 5 AUTO
DEFROST menus. What you need to know when
using this automatic function:
1. Press the AUTOMATIC button once, the display
will appear as shown.
The menu can be chosen by pressing the
AUTOMATIC button until the desired menu
number is displayed. See pages 15-17
"AUTOMATIC charts".
To select a defrost menu, press the AUTOMATIC
button at least 8 times. If you press the button 8
times,
The menu will be changed automatically by
holding down the AUTOMATIC button.
2. The weight or quantity of the food can be input
by rotating the TIMER/WEIGHT knob until the
desired weight is displayed.
• Enter the weight of the food only. Do not include
the weight of the container.
• For food weighing more or less than weights
given in the cooking chart, use manual
programmes. For best results, follow the cooking
charts in the cookbook.
3. To start cooking press START/+1
When action is required (e.g. to turn food over),
the oven stops and the audible signals sound,
remaining cooking time and any indicator will
flash on the display. To continue cooking, press
the START/+1
Example:
To cook gratin weighing 1,0 kg using AUTOCOOK AC-7.
1. Select the menu required by
pressing the AUTOMATIC
button seven times.
07:43 Page 15
will appear in the display.
button.
MIN
button.
MIN
2. Enter the weight by rotating
the TIMER/WEIGHT knob
clockwise.
x7

AUTOMATIC OPERATION

1.
AUTOMATIC button
2.
TIMER/WEIGHT knob
3.
START/+1
The final temperature will vary according to the
initial food temperature. Check food is piping hot
after cooking. If necessary, you can extend the
cooking time and change the power level.
15
x1
Menu number
button
MIN
3. Press the START/+1
MIN
button.
x1
Check the display.