Radio - Panasonic CQ-C7703N Operating Instructions Manual

Radio

This chapter explains how to listen to the radio.
1
Press [SRC] (SOURCE) to select the
radio mode.
2
Press [BAND] to select a band.
Notes:
¡ For tuning in on only stations whose receiving condi-
tions are good in the station search, set LOCAL to ON.
(a page 19)
¡ For reducing noise when a receiving FM stereo wave
is weak, set MONO to ON.
Preset Number
Band
18
CQ-C7703N/C7303N
(a page 19)
Lights while receiving an FM stereo signal.
Lights when MONO is activated.
(a page 19)
3
Select a station.
Frequency adjustment
[]] (TUNE): Lower
[[] (TUNE): Higher
Note: Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[{] (P·SET: Preset): Lower preset number
[}] (P·SET: Preset): Higher preset number
Note: Direct selection can be executed with [1] to
[6] buttons on remote control.
Frequency
Lights when LOCAL is
activated. (a page 19)