Panasonic CQ-C7703N Operating Instructions Manual page 39

Problem
The number of auto
preset stations is
less than 6.
Preset stations
cannot be stored.
PS does not appear
even if an RDS
station is tuned in to.
("NO PS" appears.)
Receiving
programs differs
from PTY that was
already set up.
"NONE" appears
when selecting
PTY.
The clock time (CT)
is not accurate.
An AF station
cannot be received
even if AF indicator
lights.
Possible cause
The number of receivable stations is less than 6.
a Move to an area where receivable stations number is maximum, and try pre-
setting.
The contact of the battery lead is poor, or the battery lead is not always powered.
a Make sure that the battery lead is connected securely, and preset stations
again.
A PS code cannot be received for the reason of bad receiving conditions, etc.
a A PS code appears if it is received. Wait for a while until conditions change.
When the station changed between programs, the unit could not receive the PTY
code.
An appropriate programme is searched for and tuned in to after receiving a
a
corresponding PTY code. Therefore, wait for a while.
Any specified PTY programs cannot be received. There is no desired programme
being broadcast in your area.
a Select another PTY, or wait until a desired programme starts.
The unit received a station broadcasting time that is not appropriate for you, or the
unit is receiving a station that does not broadcast time.
a Receive a station broadcasting time that is appropriate for your area, or
adjust CT manually.
There is little difference in receiving conditions between the current station and AF
stations. Update of the AF list ended in failure.
a Wait until the AF list is successfully updated. For unstable reception, tune in
to a stable station by the hand.
Possible solution
a
CQ-C7703N/C7303N
39