Gigaset 28H - First Steps; Package Contents; Setting Up The Handset For Use - Siemens Gigaset C28H Instruction Manual

Gigaset 28H – First Steps
Gigaset 28H –
First Steps

Package contents

u
One Gigaset 28H handset with battery
cover
u
Two batteries
u
One belt clip
u
One Gigaset charging cradle
u
One AC adapter for the charging cradle
u
One User Guide
Headset socket
Which headsets are compatible?
Please call the Service number
1-866-247-8758 or contact us at
www.gigaset.com/customercare for infor-
mation.
Caution:
Do not charge the handset in the charging unit
or base station while the headset is connected.
Connecting the charging cradle
¤
First connect the power adapter to the
charging cradle (1) and then the AC
power adapter to the 110V AC power
socket (2) as shown below.
1
Underside of the charging cradle
6
2

Setting up the handset for use

Inserting the batteries
Caution:
Use only rechargeable Nickel-metal hydride
(NiMH) UL-approved AAA batteries. Never use
a conventional (non-rechargeable) battery or
other battery types as this could result in sig-
nificant health risks and personal injury. For
example, the batteries could explode. The
phone could also malfunction or be damaged
as a result of using batteries that are not of the
recommended type.
Note:
If attached, remove the belt clip before open-
ing the battery cover.
¤
Open the battery cover.
¤
Insert the batteries according to the
correct polarity (see diagram).
The polarity is indicated in/on the battery
compartment.
¤
Close the cover, and press the top so
that it clicks into place.