Operating Procedure - Siemens LC 89950 GB Operating And Installation Instructions

Operating procedure

The most effective method of removing
vapours produced during cooking is to:
Switch the ventilator ON
as soon as you begin cooking.
Switch the ventilator OFF
a few minutes after you have finished
cooking.
Display for
fan setting
Light Reduce fan speed
Fan – OFF –
Acoustic signal:
When a button is pressed, this is verified
by an acoustic signal.
Switching off the acoustic signal:
Simultaneously press buttons
Ü
and – until a signal is emitted after
approx. 3 seconds.
Switching on the acoustic signal:
Repeat the process.
Switching the fan ON
Ü
Press the + button.
Setting the required fan speed:
Ü
Press the + button.
The fan speed is increased by one step.
Ü
Press the – button.
The fan speed is reduced by one step.
Fan ON and
increase speed
–
0
Switching the fan OFF:
Keep pressing the
fan switches off.
{
The displayed
afterwards.
Intensive setting:
Maximum power is obtained at the
intensive setting. It is only required for short
intervals.
Keep pressing the
appears in the display.
If the intensive setting is not cancelled by
hand, the fan will automatically switch
}
back to step after 10 minutes.
Lighting:
Briefly press the
switch the light on and off.
The light can be switched on at any
time, even though the fan is switched off.
Adjusting the brightness:
Hold down the
0
the desired brightness is obtained.
Switching on the light automatically, e.g.
via a timer:
Fan and light must be switched off.
Switching on:
Simultaneously press the
buttons.
After approx. 3 seconds the light
switches on to acknowledge the setting.
Switching off:
Repeat the process with the light switched
on.
After approx. 3 seconds the light
switches off to acknowledge the setting.
Ü
– button until the
goes out shortly
Ü
+ button until a
+/ – button to
0 0
+ or – button until
0
– and +
0 0
ç
5