Video Out; Jpeg Interval - Toshiba XDE600KE Owner's Manual

Function setup
Customizing the Function Settings (continued)
Setting details

Video out

1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the
out.
4) Press ENTER button, then use the
select the output mode (Component, RGB, P-Scan or
HDMI).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Component:Select if you connect the DVD to your TV
which has component video inputs.
RGB: Select if you connect the DVD to your TV which has
RGB inputs by scart cable.
P-Scan: Select if you connect the DVD to your TV which
has component video inputs that support progressive
scan.
HDMI: High Defi nition Multimedia Interface. Select if you
connect the DVD to TV via HDMI input.
HDMI Resolution
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the
Resolution.
4) Press ENTER button, then use the
the options (Auto, 480p/576p, 720p, 1080i, 1080p or
1080p/24F).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Notes
• When TV System is set to PAL or Auto, you cannot select
the "1080p/24F".
• If the Video Output is not set to "HDMI", you cannot select
the "HDMI Resolution".
• When the picture mode is Sharp, Colour or Contrast, the
HDMI resolution cannot be set to 480p/576p and 720p.
• Select the HDMI resolution according to the performance
of the connected TV.
34

JPEG Interval

1) Press SETUP button.
2) Press
/ button to select Video
3) Press
/ button to
4) Press ENTER button, then use the
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Off:
5 seconds: Plays back images in the form of a slide show
Aspect Ratio : 16 : 9
: Auto Fit
10 seconds: Plays back images in the form of a slide show
TV System : PAL
Video out
15 seconds: Plays back images in the form of a slide show
RGB
HDMI Resolution
P-Scan
JPEG Interval
HDMI
Picture Modes : NATURAL
Picture Modes
1) Press SETUP button.
2) Press
3) Press
4) Press ENTER button, then use the
/ button to select HDMI
5) Press ENTER button.
/ button to select
6) Press SETUP button to exit the menu.
Sharp:
Colour:
Contrast:
Aspect Ratio : 16 : 9
Off:
: Auto Fit
TV System
: PAL
Auto
Video out
480p/576p
HDMI Resolution
720p
JPEG Interval
1080i
1080p
Picture Modes : NATURAL
Notes
• Picture Modes is only available when the Video out is
• If HDMI resolution is set to 480p/576p or 720p, the
/ button to select Video.
button, then use the /
JPEG Interval.
and change the JPEG Interval.
Plays back one fi le at a time.
at 5 seconds interval.
at 10 seconds interval.
at 15 seconds interval.
Aspect Ratio
TV System
Video out
HDMI Resolution
JPEG Interval
Picture Modes
/ button to select Video.
button, then use the
Picture Modes.
picture mode (Sharp, Colour, Contrast or Off).
Select this to make the picture sharper.
Select this to make the picture sharper with
enhanced colour.
Select this to make the picture sharper with
bigger contrast.
Select this to follow the original picture
setting.
Aspect Ratio
TV System
Video out
HDMI Resolution
JPEG Interval
Picture Modes
set to "HDMI" and outputs via HDMI.
Picture Modes cannot be activated.
button to select the
/ button to shift
: 16 : 9
: Auto Fit
: PAL
: HDMI
Off
5 seconds
10 seconds
: NATURAL
15 seconds
/ button to select
/ button to select
: 16 : 9
: Auto Fit
: PAL
: HDMI
Sharp
Colour
Contrast
Off