Backup Settings - Sitecom WL-326 User Manual

Backup Settings

The Backup screen allows you to save (Backup) the router's current configuration
settings. When you save the configuration setting (Backup) you can re-load the
saved configuration into the router through the Restore selection. If extreme
problems occur you can use the Restore to Factory Defaults selection, this will set
all configurations to its original default settings (e.g. when you first purchased
the router).
Use the "Backup" tool to save the Broadband router current configuration to a file
named "config.bin" on your PC. You can then use the "Restore" tool to restore
the saved configuration to the Broadband router. Alternatively, you can use the
"Restore to Factory Defaults" tool to force the Broadband router to perform a
power reset and restore the original factory settings.