Url Block - Sitecom WL-326 User Manual

URL block

You can block access to some Web sites from particular PCs by entering a full URL
address or just keywords of the Web site.
Enable URL Blocking Enable/disable URL Blocking.
Add URL Keyword Fill in "URL/Keyword" and then click "Add". You can enter the
full URL address or the keyword of the web site you want to block.
Remove URL Keyword If you want to remove some URL keywords from the
"Current URL Blocking Table", select the URL keyword you want to remove in the
table and then click "Delete Selected". If you want remove all URL keywords from
the table, just click "Delete All" button. If you want to clear the selection and re-
select again, just click "Reset".
Click <Apply> at the bottom of the screen to save the above configurations.