Table of Contents
Advertisement
Virtual Server
Use the Virtual Server function when you want different servers/clients in your
LAN to handle different service/Internet application type (e.g. Email, FTP, Web
server etc.) from the Internet. Computers use numbers called port numbers to
recognize a particular service/Internet application type. The Virtual Server allows
you to re-direct a particular service port number (from the Internet/WAN Port) to
a particular LAN private IP address and its service port number.
Enable Virtual Server Enable Virtual Server.
Private IP This is the LAN client/host IP address that the Public Port number
packet will be sent to.
Private Port This is the port number (of the above Private IP host) that the
below Public Port number will be changed to when the packet enters your
LAN (to the LAN Server/Client IP).
Type Select the port number protocol type (TCP, UDP or both). If you are unsure,
then leave it to the default "both" setting. Public Port Enter the service
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WL-326 and is the answer not in the manual?
Questions and answers