Using Your Machine; Load The Laundry; Start The Machine; Measure Out The Detergent - Tricity Bendix AW 871 Operating And Installation Instructions

USING YOUR MACHINE

WASHING 4.5 KG OF COLOUR FAST
COTTON AT 60°C
Suppose you have 4.5 kg normally soiled laundry to wash.
It is cotton and is colour fast at 60°C.

1 Load the laundry

P0004

2 Measure out the detergent

3 Add the fabric softener if required

4 Depress the option button required
Depress HALF LOAD button if required.
Open the door by pulling the
catch outward.
Load the items one at a time
and close the door.
Pull out the detergent
dispenser drawer from the
control panel. Measure out
the amount of detergent
required and pour into the
main wash
compartment .
If you wish to carry out a
prewash(*), pour the amount
of detergent required into the
"prewash" compartment
(*) Prewash is available only on
programme 1
Pour the fabric softener, if
required, into the
compartment marked
Do not exceed the MAX.
level and then close the
drawer gently.
5 Select the required wash programme
4
P0345

6 Start the machine

Before starting up the machine, check that:
• the appliance is plugged in
• the water supply taps are turned on
• the drain hose is correctly and securely positioned
• the door and the detergent dispenser drawer are closed.
Pull the programme selector dial outwards.
The operating pilot light will illuminate and the machine will
start operating.

7 At the end of the programme

The machine stops automatically and the operating pilot
light goes out.
The door is controlled by a safety device which releases 2
minutes after the end of the programme.
.
Before opening the door ensure there is no water in the
drum.
Switch the machine off by depressing the programme
selector dial.
When the programme has finished, you are advised to
unplug the appliance and turn off the water taps.
.
Turn the programme selector
dial clockwise to the
required programme.
13