Tricity Bendix AW 871 Operating And Installation Instructions page 14

USING YOUR MACHINE
WASHING 2.25 KG OF SYNTHETICS AT 40°C
Suppose you have 2.25 kg of synthetic fabric laundry to
wash. They are rather delicate fabrics and should not be
washed at a high temperature.
1 Load the laundry
P0004
2 Measure out the detergent
3 Add the fabric softener if required
4 Depress the option button required
Depress RINSE & HOLD button if required.
14
Open the door by pulling the
catch outward.
Load the items one at a time
and close the door.
Pull out the detergent
dispenser drawer from the
control panel. Measure out
the amount of detergent
required and pour into the
main wash
compartment .
Pour the fabric softener, if
required, into the
compartment marked
Do not exceed the MAX.
level and then close the
drawer gently.
5 Select the required wash programme
8
P0345
6 Start the machine
Before starting up the machine, check that:
• the appliance is plugged in
• the water supply taps are turned on
• the drain hose is correctly and securely positioned
• the door and the detergent dispenser drawer are closed.
Pull the programme selector dial outwards.
The operating pilot light will illuminate and the machine will
start operating.
7 At the end of the programme
After the last rinse, the machine will drain the water unless
the rinse & hold button has been selected.
To spin select programme 6.
The door is controlled by a safety device which releases 2
minutes after the end of the programme.
Before opening the door ensure there is no water in the
drum.
Switch the machine off by depressing the programme
.
selector dial.
When the programme has finished, you are advised to
unplug the appliance and turn off the water taps.
Turn the programme selector
dial clockwise to the
required programme.