Chevrolet Corvette 2012 Manual page 83

The system
zooms out to the maximum
available map scale on the right
map when in dual map mode.
The system
displays the North Up heading on
the right map when in dual
map mode.
The system
displays the Vehicle Up heading on
the right map when on the map
screen and in dual map mode.
The system changes
from North Up to Heading Up or
from Heading Up to North Up.
The system changes the
map display to dual map mode.
The system changes the
map display to single map mode.
system changes the map display to
the 3-dimensional map.
system changes the map display to
the 2-dimensional map.
The system
enters the Home destination as a
waypoint or final destination, if a
home destination has been stored.
The system enters
the last available starting point as a
waypoint or final destination.
system enters the last available
destination as a waypoint or final
destination, if one is available.
goes to the preset destination
number. This preset destination can
The
be chosen as a waypoint or a
destination. There must be a
location stored in the preset
The
destination number that is chosen.
For example, first store a location in
Preset Destination 3. Say Go to
Preset Destination 3. The system
goes to Preset Destination 3 and
prompt you to choose it as a
waypoint or destination.
adds the current marked point as a
waypoint. This command is used
after the following commands have
been used: Home, Go to Starting
Point, Go to Previous Destination.
The
adds the current marked point as
the final destination. This command
is used after the following
commands have been used: Home,
Go to Starting Point, Go to Previous
Destination.
The system
The system
The system