Chevrolet Corvette 2012 Manual page 62

3. Press OK once the vehicle is in
the current position.
If a route had already been set,
the map screen displays, press
Guide to change your route to
the vehicle's new position.
Once the process of changing
the vehicle's current position is
complete, the map screen
displays with rotate arrow screen
buttons around the vehicle.
4. To change the direction of your
vehicle, press either arrow to
turn the vehicle to the correct
direction.
5. Once the vehicle is facing the
correct direction, select OK.
See
for more information.
If there are tire pressure differences
or a spare tire is installed, the
system automatically re-calibrates
the system but it may take longer.
To calibrate the vehicle speed
signal, press the Distance screen
button. See
for more information.
Press this
button from the NAVIGATION SET
UP screen. This feature allows
several route options to be turned
on or off.
From this screen, adjust the
following:
Instructs the system to notify you
when the current route has traffic
restrictions.
Displays the estimated time of
arrival to the destination.
Displays the amount
of drive time estimated to arrive at
the destination.
Turns the
guidance screen on and off.
freeway exit information. This is only
available on freeways during route
guidance.
Displays