Chevrolet Corvette 2012 Manual page 17

Up to 30 stations, 6 AM, 6 FM1,
6 FM2, 6 XM1, and 6 XM2,
if equipped, can be programmed for
home and for away (XM does not
have the home and away feature).
To store presets:
1. Turn the audio system on.
2. Press SRCE.
3. Press AM, FM1, FM2, XM1,
or XM2, if equipped, to display
the desired source. The preset
station menu appears.
4. Tune to the desired station by
using SEEK
5. Press SOUND to set the bass,
mid-range, treble, and Auto Tone
Control (ATC) for the preset,
if desired. See Sound Menu
later in this section for more
information.
6. Press and hold one of the six
numbered preset screen buttons
for more than two seconds until
a beep is heard.
7. Repeat the steps for each preset
and source.
Press to scan stations. The radio
goes to a station, plays for a
few seconds, then goes to the
next station.
Press SCAN again to stop
scanning.
Press and hold SCAN for
two seconds to scan preset
.
stations. It will only scan the
audio source it is in, with the
exception of FM 1 and FM 2,
which will both be scanned if in
that source.
Press SCAN again to stop
scanning.
Radio Data System (RDS) in this
section for more information.
See Radio
Data System (RDS) in this section
for more information.
1. Press this screen button to
replace currently stored preset
stations with the strongest
stations available in the
immediate area.
2. Press it again to return to the
original preset stations.
See Sound Menu
following in this section for more
information.
See