Using The Quattro With Your Computer - Connection And Operation - Phoenix Quattro User Manual

5. Using the Quattro with Your Computer - Connection and
Operation
1) Plug the USB cable (supplied) into the Quattro on one end, and to your computer on the
other end.
2) Push the Power Button – the unit will turn on
(blue light is on as an indication). The unit will
identify itself as Phnx MT301. In most cases
the Quattro will become your system's default
audio device. In some cases (depending on the application you are using and on the
operating system you are running) you'll have to select the Quattro as your Audio Input
and Output device.
Note: if your unit does not have a battery (if it's not equipped with an interface module), or
when the unit's battery power level is low, the unit will turn on as soon as you plug it into the
USB port and you will not have to push the Power button to turn On. You will still be able to
turn the unit Off and On again as you wish.
3) You can control the unit's pickup level (microphone) using your computer's audio
controls. You can control the unit's playback (speaker) level using either the computer's
audio controls or the unit's Volume Up / Volume Down controls.
- 12 – Phoenix Audio Technologies www.phnxaudio.com