Phoenix Quattro User Manual page 15

4) Plug the narrow connector of the unique
cable to the Quattro (left side) and the
other side to your telephone (same jack
that you unplugged before and is
typically used to connect your telephone
to the line).
5) You can now use your telephone as
before to dial out and get calls in.
6) L1's (or L2) position determines whether
your telephone is connected to the line
or the Quattro (refer to the functional
drawing on the next page). When L1 is
active (light is on) the Quattro is
connected, when it is inactive (light is
off) your telephone is connected.
7) Please follow these steps to conduct a
conference call:
a. Dial out: pick-up your telephone's
handset and dial the number you want to
call. At any time after dialing push L1 (or L2 if you dialed using line 2) to transfer
the call to your Quattro. The Quattro is now connected to the line and your
- 15 – Phoenix Audio Technologies
PSTN Connection Diagram
www.phnxaudio.com