Page 2
It is extremely user-friendly and its plug-and-play design eliminates the need for additional driver installations. The Duet PCS, which is the USB only model of the Duet family, is a desktop solution specifically geared for Voice over IP (VoIP) conferencing.
Plug the USB end of the cable into any USB port on your computer. Your Duet is ready to use. No additional drivers or steps are needed; however we do recommend downloading and using our “Phoenix Audio Setup Utility” for optimal audio controls and performance. This utility can be found on our website: www.phnxaudio.com...
Page 4
The volume buttons will control the level of audio heard from the speaker and not the sensitivity of the Duet’s microphone. To adjust the microphone volume level, use the Phoenix Audio Setup Utility, which can be found on our website.
EXTERNAL SPEAKER The 3.5mm “External Speaker” jack located on the Duet’s connector panel can be used to connect any type of amplified speakers. The external speakers will be used by the Duet to play sound and the Duet’s internal speaker will be muted. SPECIFICATIONS Compatibility Acoustic echo cancellation >40 dB...
The following warranty statement is effective for all Phoenix Audio Technologies’ products as of October 1st, 2007: Phoenix Audio Technologies warrants that this product is free of defects in both materials and workmanship. Should any part of this product be defective, the Manufacturer agrees, at its option, to repair or replace with a like new replacement any defective part(s) free of charge (except transportation charges) for a period of two years for all products.