Pstn Interface - Connection And Operation - Phoenix Quattro User Manual

6. PSTN Interface - Connection and Operation

1) The PSTN interface panel has two RJ jacks –
one narrower than the other. A unique telephone
cable is supplied with the unit. This cable has a
narrow RJ connector on one end, and a wider
one on the other.
2) The Quattro utilizes your telephone for the dialing and ringing functions. It is connected
directly to your PSTN line (through the RJ jack in the wall) using a standard telephone
cable (provided with your phone). The telephone is connected to the Quattro using the
unique cable supplied with the Quattro.
Note: the unit is supplied with a 6' cable. A 20' cable is also available and can be purchase
separately.
3) If your telephone is currently connected to your telephone line – unplug the cable from
your telephone (leave the "wall side" connected) and plug the loose end to the Quattro
(the wider jack on the right). If your telephone is not connected to the telephone line, use
a standard telephone cable, plug one end to the Quattro (wider jack on the right) and the
other end to your telephone's line wall jack.
- 14 – Phoenix Audio Technologies www.phnxaudio.com