EMN20010
EMH80010
IMPACT DAMAGE
w
The outboard motor can be seriously
damaged by a collision while operating
or trailering. Damage could make the out-
board motor unsafe to operate.
If the outboard motor hits any object in
the water, follow the procedure below.
1) Stop the engine immediately.
2) Inspect control system and all compo-
607011
3) However damage is found or not
4) Have a Yamaha dealer inspection of
EMU01321
POWER TILT WILL NOT OPERATE
If the engine cannot be tilted up or down
with the power tilt because of a dis-
charged battery or a failure with the
power tilt unit, the engine can be tilted
manually.
1 Manual valve screw
q
EMU00421
1) Loosen the manual valve screw coun-
2) Put the engine in the desired position,
000605
5-5
TEMPORARY ACTION IN
EMERGENCY
nents for damage. Also, inspect the
boat damage.
found, go back to a nearest harbor
slowly and carefully.
the outboard motor, before operating
it again.
terclockwise until it stops.
then tighten the manual valve screw
clockwise.
E