Routine Maintenance; Door Rope Gasket; Exhaust Vent; Motor Lubrication - Whitfield ADVANTAGE PLUS Owner's Manual & Operating Instructions

Table of Contents

Advertisement

UNPLUG STOVE BEFORE PERFORMING ANY MAINTENANCE WORK
Door Gasket
test of the integrity of the door seal. Close the door on the paper in several different locations and pull. It
is normal to feel only a slight amount of friction. The door gasket does not need to be "tight"in all areas,
since a small amount of leakage is not hazardous or detrimental to the performance of your stove.
Exhaust Passages and Vent Pipe:
Inspect frequently and clean when necessary. Fly ash will accumulate at all bends in the exhaust system.
Note: Large amounts of fly ash build-up will create a lack of combustion air. Removing the Tee cap on
vertical installations will allow an inspection of the ash build-up in the exhaust Tee and will help you
to decide how frequently more extensive cleaning must be performed.

Motor Lubrication:

THE BLOWERS ARE PERMANENTLY LUBRICATED BY THE MANUFACTURER.
Rear Stove Compartment:
The rear stove compartment should be cleaned periodically (a minimum of once a year.) DISCONNECT
ELECTRICAL CORD PRIOR TO CLEANING STOVE. Any household dust, pet hair or sawdust should be vac-
uumed or wiped out of the rear compartment of the stove, Freestanding or Fireplace Insert model. The

Window Wash

Routine Maintenance

The following areas need to be inspected as part of
routine maintenance:
Door Rope
Gasket:
The condition of
the rope gasket
around the door
and windows
should be
checked periodi-
cally and replaced
or repaired if nec-
essary. A one inch
strip of paper may
be used to perform a
electrical components
should be wiped clean.
Window Wash:
Periodically insert a small piece of cardboard
(a business card) between the window trim
and the window. Slide the card back & forth
a few times to clear any dust or fibers from
the window wash gap. Open the door and
repeat from the other side of the glass.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents