Removing The Transportation Protection Devices - Siemens washing machine Instruction Manual And Installation Instructions

Removing the transportation protection devices

Before the machine is used for the first time, all transportation protection devices
from the back of the appliance must be removed and stored for any later transport
(i.e., relocation).
1 Remove the machine from the transport
base. Remove wedge
2 Remove the 4 screws
a screwdriver (Figure 2.1 ).
3 Remove transportation protection
devices : Both bolts
purpose (Figure 2.2 ) remove with
a 10 mm or 13 mm spanner (depending
upon model).
Figure 1
A
(Figure 1 ).
with
are for this
6
Check to see that both plastic inserts
on the connecting carrier have also
been removed.
Refasten the screws
locations.
Close off both holes with the
4
provided caps
accessories package). ( Figure 2.3 )
Figure 2.1
Figure 2.2
13
Figure 2.3
at their original
(found in the
2
1
2
1