Cleaning the filter
Cleaning the pump filter
This filter collects bits of fluff and small
objects, i.e. detached buttons that have fallen
into the container.
To clean, proceed as follows:
- Turn the drum so that the closed drum lid is on
the bottom: A plastic part
(Figure 17).
Figure 17
- Remove screw
.*
- Press to release retainer
to the right to unlatch.
- Turn the drum so that the lid points upwards.
Open the drum lid, slide part
direction of the arrow and remove
(Figure 18).
Figure 18
A
•Gently turn the drum with open doors to
front side of the machine (Figure 19) .
Access to the pump filter is accomplished
by removing part
(depending upon model)
can be seen
C
B
A
and slide part
in the
.
- Remove this part from its holder (Figure 19).
Figure 19
- Remove foreign objects and fluff.
- Clean filter under running water (Figure 20) .
Figure 20
- Press filter back into its holder up to the
stop.
* Depending upon the model.
22