Selecting Direct Mode Channels And Groups; Scanning The Groups On A Channel - Nokia TMR880 User Manual

Selecting direct mode channels and groups

Up to 60 direct mode channels can be stored in your radio's memory. Up to three
groups can be stored for each channel. To select a channel, turn the group selector
until the desired channel is displayed. Wait until Group selected is displayed and
the radio plays a short tone. If voice feedback is activated, the radio plays the
index number of the channel when you turn the group selector.
When you select a channel, the first group (A) is automatically selected. Pressing
the back key switches between the second and the third group (B and C) on the
same channel, and pressing and holding the back key selects the first group (A) on
the channel. If voice feedback is activated, the radio plays the index name (A, B or
C) of the group when you use the back key.
You can also select the channel and group with or . Press or
to access the list of channels. Scroll to the desired channel, press Groups
and select the desired group.

Scanning the groups on a channel

Direct mode scanning allows you to receive calls made to the other groups on the
same channel. Press Menu and select Settings, Direct mode settings and Direct
mode scanning and select On or Off.
You can also activate and deactivate direct mode scanning in the fast menu. Press
and select Scanning on or Scanning off by pressing and holding . See also
Fast menu on page 44.
Copyright © 2005 Nokia. All rights reserved.
68