Dynamic Talk Groups - Nokia TMR880 User Manual

Accessing the group list in standby mode
on page 56.
Making a call to the home group
You can easily select the home group by pressing and holding the back key. If
voice feedback is activated, the radio plays "Home". When the home group's name
is displayed in standby mode, press and hold the PTT key. You can start speaking
after a short tone is played and
You can also set pressing and holding the duty key
group (see Duty key setting
key . Note that a handsfree microphone and a loudspeaker need to be
connected for this function to work.

Dynamic talk groups

Dynamic talk groups can be added to and removed from your radio's memory over
the air by your service provider. When groups are added or removed, an
information note is displayed (e.g.,
pressing View. The changes are saved in the
journal on page 58.
The dynamic groups are included at the end of the selected folder, if the folder has
been set to show dynamic groups. For details, contact your service provider.
Copyright © 2005 Nokia. All rights reserved.
on page
(transmitting) appears on the display.
on page 103). When you talk, press and hold the duty
Group added) and you can view the changes by
Group journal
52 and Options in the group list
to make a call to the home
submenu, see Group
48