Alarm Clock - Nokia TMR880 User Manual

barring before you enter the area where you want transmission to be barred. The
indicator or
active. See Transmission barring

Alarm clock

The alarm clock uses the time format set for the clock. The alarm clock works even
when the radio is switched off. When the alarm is on, the indicator
displayed in standby mode.
To set the alarm, press
time and press OK. To change the time when the alarm time has been set, select
On. To switch the alarm off, select Off.
When the alarm time expires, the radio will play an alert tone, and flash
and the alarm time on the display. (If the
not played if the radio is switched on when the alarm time expires. However, the
alert tone is played if the radio is switched off when the alarm time expires.) Press
Stop to stop the alarm. If you let the radio continue to alarm for a minute or press
Snooze, the alarm stops for a few minutes and then resumes.
If the alarm time is reached while the radio is switched off, the radio switches itself on and
starts sounding the alarm tone. If you press Stop, the radio asks whether you want to
activate the radio for calls. Press
Note: Do not press
prohibited or when it may cause interference or danger.
Copyright © 2005 Nokia. All rights reserved.
is displayed in standby mode when transmission barring is
on page 22.
Menu and select Settings
Silent
No to switch off the radio or
Yes to switch the radio on when wireless phone use is
and Alarm clock. Key in the alarm
profile is in use, the alert tone is
Yes to make and receive calls.
is
Alarm!
101